Inspector 0.9.5: stack redeploy no longer blocks other checks

CHANGELOG.md

@@ -7,6 +7,134 @@ Version numbers follow [Semantic Versioning](https://semver.org/spec/v2.0.0.html
 
 ---
 
+## [0.9.5] — 2026-10-28
+
+### Fixed
+
+- **A stack redeploy no longer freezes Inspector.** After a successful Portainer
+  redeploy, Inspector used to stop everything for `post_redeploy_wait_seconds`
+  (default 90 s): no other container was checked, dashboard times stood still, and
+  stopping Inspector during the wait wasn't clean. Now the redeployed app is left to
+  settle while every other container keeps being checked, and its one-time HTTP
+  re-check (with the "recheck failed" alert) happens on its first check after the wait.
+- The redeployed app's cooldown now starts after the settle time. Before, the wait
+  ate into it (with the defaults, 300 s cooldown became 210 s).
+
+---
+
+## [0.9.4] — 2026-10-28
+
+### Fixed
+
+- **Containers without a Docker health check now "recover" properly.** Many images
+  don't define a health check, so Docker reports them as `NO HEALTH CHECK` even when
+  they work. Inspector only treated `HEALTHY` as back to normal, so for these
+  containers:
+  - the error count never reset, and one-off failures days apart added up to a restart;
+  - no "recovered" alert was sent;
+  - with *Restart, then redeploy*, the next unrelated problem skipped the restart and
+    redeployed the whole stack.
+
+  Now `NO HEALTH CHECK` counts as working (unless you made it a restart trigger): the
+  count resets, the "recovered" alert is sent ("back to running (no health check)"),
+  and the next problem starts with a plain restart. Containers with a health check
+  behave exactly as before.
+
+---
+
+## [0.9.3] — 2026-10-28
+
+### Changed
+
+- **Every time follows the `TZ` of the Inspector stack.** Before, the dashboard,
+  Events page and alerts were always in US Pacific time while the maintenance window
+  and logs used `TZ`, so anyone outside Pacific saw times hours off (e.g. a 02:00
+  Berlin window shown as 5:00 PM). Now the dashboard, the Events page (including
+  where each day starts), alert times, cooldown times and logs all use `TZ`.
+- Alert times include the zone abbreviation (`10-28 09:27 AM CET`), and "Cooldown
+  until" in alerts, event messages and logs is a local time instead of a UTC
+  timestamp.
+- The active time zone is shown at the bottom of every Settings page, on the Events
+  page and on the Maintenance page.
+- **If you never set `TZ`**, times are now shown in UTC instead of Pacific. Set `TZ`
+  in the stack (e.g. `America/New_York`). An unrecognized name logs a warning and
+  falls back to UTC.
+
+### Docs
+
+- INSTALL: `TZ` is now marked as needed, with a "Why the time zone matters" section
+  (maintenance window, alerts, dashboard, logs), how to find your zone name, and a
+  troubleshooting row. Guide: a Time zone section and a first-login check. Compose
+  and README updated.
+
+---
+
+## [0.9.2] — 2026-10-28
+
+Fixes from a code and security review. None of them change how containers are
+monitored or recovered.
+
+### Fixed
+
+- **A bad value saved from Settings can no longer stop Inspector from starting.**
+  The forms now reject invalid times (maintenance start/end), unknown log levels and
+  out-of-range numbers (for example `interval_seconds: 0`, which made the loop spin).
+  If `config.yml` already has such a value, Inspector starts with the default and
+  logs a warning instead of crashing in a restart loop.
+- **The dashboard password can no longer be cleared.** Saving an empty password (or
+  username) is refused, and an empty password never signs anyone in. Before, clearing
+  it left the running dashboard open to anyone.
+- **Passwords with non-ASCII characters (é, ü, £ …) now work.** Before, every login
+  attempt with one crashed.
+- The Events page no longer errors for a moment after a container is removed.
+- The HTTP check hint no longer suggests `302` as an expected status; redirects are
+  followed, so the final page's code is what counts.
+
+### Security
+
+- **Sign-in throttling:** after 5 failed sign-ins (form or Basic Auth) from one address
+  within 5 minutes, that address is refused for the rest of the window.
+- **Changing the dashboard username or password signs out existing sessions.**
+  Expired sessions are cleaned up.
+- Request bodies are limited to 1 MB; an invalid `Content-Length` gets a 400.
+- The Gotify token is sent in the `X-Gotify-Key` header instead of the URL, so it no
+  longer appears in Gotify or reverse-proxy access logs.
+- Portainer token environment variables must be named `PORTAINER_…` (a name already in
+  your `config.yml` keeps working), so Test connection can't be used to send other
+  container secrets to an arbitrary URL.
+- Single quotes are escaped in HTML, and the delete confirmations build their text safely.
+- Two settings saves at the same moment can no longer overwrite each other.
+- `requests` updated to 2.32.5 (CVE-2024-47081).
+
+---
+
+## [0.9.1] — 2026-10-28
+
+### Fixed
+
+- **A dependency on a disabled container no longer blocks recovery forever.** If
+  `depends_on` named a container that is disabled in Inspector, the dependent app was
+  never restarted. Inspector now only waits for dependencies it is watching, and the
+  container page warns when the selected dependency is disabled.
+- **`PORTAINER_API_TOKEN` now reaches the container.** The public `compose.yml` didn't
+  pass it in, so setting it as a Portainer stack variable had no effect. Existing
+  stacks need the line `- PORTAINER_API_TOKEN=${PORTAINER_API_TOKEN:-}` added under
+  `environment:` (Stacks → inspector → Editor).
+- The "depends_on … is disabled or not found" warning was logged on every check
+  (since 0.8.0). It is now logged once, and again only when the container settings
+  change.
+
+### Changed
+
+- Guide: new sections **6. Apps behind a VPN container** (why depends_on matters, how to
+  spot a VPN-routed app, setup, what Inspector does) and **7. Portainer stack redeploy**
+  (why it's needed, what a redeploy does to the whole stack, requirements, where to find
+  every value, adding the token, the other settings, Test connection errors).
+- Clearer form hints: `vpn_routed` only affects logging; `depends_on` works for any
+  dependency; where to find the endpoint ID.
+
+---
+
 ## [0.9.0] — 2026-10-28
 
 ### Added

INSTALL.md

@@ -52,10 +52,38 @@ TZ=America/Los_Angeles
 |---|---|---|
 | `INSPECTOR_DATA` | Folder on your server where Inspector keeps its settings, logs, and history. **Unraid:** `/mnt/user/appdata/inspector`. **Other Linux:** `/opt/inspector`. Created automatically. | Yes |
 | `INSPECTOR_PASSWORD` | Password for the dashboard (username `admin`). Used only on first start; change it later in the dashboard. Leave it out and Inspector generates one and prints it in the container logs. | Recommended |
-| `TZ` | Your [timezone](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones), so times on the dashboard are local. | Recommended |
+| `TZ` | **Your time zone**, e.g. `America/New_York` or `Europe/Berlin`. Without it Inspector uses UTC, so the maintenance window, alerts and dashboard times are off by your UTC offset. See [Why the time zone matters](#why-the-time-zone-matters). | **Yes** (default `UTC`) |
 | `INSPECTOR_PORT` | Port on your server for the dashboard. Change it if `8080` is taken. | No (default `8080`) |
 | `INSPECTOR_TAG` | Version to run, e.g. `0.8.0`. See [Updating](#4-updating). | No (default `latest`) |
 | `PUID` / `PGID` | User and group that own Inspector's files. Unraid users often use `99` / `100` so the files match other appdata. | No (default `1000` / `1000`) |
+| `PORTAINER_API_TOKEN` | A Portainer access token. Only needed if you use **Portainer stack redeploy** for VPN-routed apps; see the in-app guide (Help → Portainer). | No |
+
+### Why the time zone matters
+
+Inspector uses `TZ` for every time it shows or acts on. If it's wrong, things
+still work, but at the wrong hour or with confusing times:
+
+- **The maintenance window runs in this time zone.** A window of `02:00–05:00`
+  with `TZ` left at UTC runs at 02:00 UTC, which is the middle of the evening in
+  the Americas or mid-morning in Asia. Inspector would then restart containers
+  during your nightly backups, and ignore real problems during the day.
+- **Alerts** (Gotify / Pushover) show the time of the problem in this zone, with
+  its abbreviation, e.g. `10-28 03:15 AM CET`.
+- **The dashboard and Events page** show times in this zone, and the Events
+  page's days run midnight to midnight in this zone.
+- **Logs** are stamped in this zone.
+
+**How to set it:** use your zone's name from the
+[list of time zones](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones)
+("TZ identifier" column), e.g. `America/New_York`, `America/Chicago`,
+`Europe/London`, `Europe/Berlin`, `Australia/Sydney`. Abbreviations like `EST` or
+`CET` don't work. On Unraid, **Settings → Date and Time** shows the zone your
+server uses.
+
+**How to check it:** the bottom of every Settings page shows
+`time zone: <name>`. If it says `UTC` and you're not on UTC, set `TZ` in the
+stack and click **Update the stack**. If the name you set isn't recognized,
+Inspector logs a warning and uses UTC.
 
 ## 3. Deploy and sign in
 
@@ -115,6 +143,7 @@ starts and restarts the ones you add to it.
 | Logs say *Permission denied on /var/run/docker.sock* | Make sure the stack has no `user:` line, then update the stack. Inspector needs to start normally to set up socket access. |
 | Red **READ-ONLY** badge at the bottom of Settings | The config folder mount ends in `:ro` or the folder isn't writable. Remove `:ro` and update the stack. |
 | Can't sign in | Look for the generated password in the container logs. If you've lost it, open `INSPECTOR_DATA/config/config.yml` (e.g. via your Unraid share), set a new `password:` under `dashboard:`, and restart Inspector. |
+| Times are a few hours off, or the maintenance window runs at the wrong time | `TZ` is missing or wrong. Check `time zone:` at the bottom of Settings, set `TZ` to your zone name (e.g. `Europe/London`), and update the stack. |
 | A container shows **CONTAINER NOT FOUND** | The name in Inspector doesn't match Docker. Copy the exact name from Portainer → Containers. |
 
 ## Security notes

README.md

@@ -35,6 +35,8 @@ restarts them when they break, and tells your phone about it.</p>
 - **Stays out of the way when you're working.** Put a container in maintenance or
   mute its alerts with one click, or set a nightly maintenance window for backups
   and updates.
+- **Works in your time zone.** Set `TZ` in the stack and the maintenance window,
+  alerts, dashboard and logs all follow it.
 
 ## Install
 
@@ -91,7 +93,8 @@ and that socket is effectively root on your server. So:
 
 - Keep the dashboard on your home network, or put it behind a VPN or a reverse
   proxy with authentication. Don't expose port 8080 to the internet.
-- Use a real dashboard password.
+- Use a real dashboard password. Repeated failed sign-ins from one address are
+  blocked for a few minutes.
 - Inspector itself runs as an unprivileged user; it starts as root only to detect
   the socket's permissions and fix ownership of its own folders.
 

compose.yml

@@ -7,13 +7,17 @@
 #                       Unraid: /mnt/user/appdata/inspector   Other: /opt/inspector
 #   INSPECTOR_PASSWORD  Dashboard password (username is "admin").
 #                       Only used on first start; change it later in Settings.
-#   TZ                  Your timezone, e.g. America/Los_Angeles
+#   TZ                  Your time zone name, e.g. America/New_York, Europe/Berlin.
+#                       Important: the maintenance window, alerts, dashboard and
+#                       logs all use it. Left unset, everything is in UTC.
 #
 # Optional:
 #   INSPECTOR_PORT      Port for the dashboard on your server (default 8080).
 #   INSPECTOR_TAG       Image version to run (default "latest"; e.g. 0.8.0 to pin).
 #   PUID / PGID         User/group Inspector runs as (default 1000/1000).
 #                       Unraid users often prefer 99 / 100.
+#   PORTAINER_API_TOKEN Portainer access token, only if you use stack redeploy
+#                       (Settings -> Portainer in the dashboard).
 #
 # No config file to create, no docker group ID to look up: Inspector creates
 # its config on first start and detects Docker socket permissions by itself.
@@ -36,3 +40,4 @@ services:
       - INSPECTOR_PASSWORD=${INSPECTOR_PASSWORD:-}
       - PUID=${PUID:-1000}
       - PGID=${PGID:-1000}
+      - PORTAINER_API_TOKEN=${PORTAINER_API_TOKEN:-}

requirements.txt

@@ -1,5 +1,5 @@
 docker==7.1.0
 PyYAML==6.0.2
-requests==2.32.3
+requests==2.32.5
 colorlog==6.9.0
 ruamel.yaml==0.18.6

src/inspector/__init__.py

@@ -1 +1 @@
-__version__ = "0.9.0"
+__version__ = "0.9.5"

src/inspector/assets/guide/guide.html

@@ -78,10 +78,12 @@
   <a href="#status">3. The Status page</a>
   <a href="#notifications">4. Notifications</a>
   <a href="#containers">5. Managing containers</a>
-  <a href="#events">6. Events history</a>
+  <a href="#vpn">6. Apps behind a VPN</a>
-  <a href="#settings">7. Other settings</a>
+  <a href="#portainer">7. Portainer stack redeploy</a>
-  <a href="#restart">8. "Requires restart" fields</a>
+  <a href="#events">8. Events history</a>
-  <a href="#trouble">9. Troubleshooting</a>
+  <a href="#settings">9. Other settings</a>
+  <a href="#restart">10. "Requires restart" fields</a>
+  <a href="#trouble">11. Troubleshooting</a>
 </nav>
 
 <main>
@@ -101,6 +103,8 @@ dashboard; you never need to touch a config file.</p>
       <i>Inspector dashboard login</i> with the username and password.</li>
   <li>Open <code>http://&lt;your-server&gt;:8080</code> and sign in.</li>
   <li>Change the password under <b>Settings → Dashboard</b> if you like.</li>
+  <li>Check the <b>time zone</b>: at the bottom of any Settings page it says
+    <code>time zone: …</code>. If that's not your zone, see <a href="#settings">Time zone</a>.</li>
 </ol>
 </section>
 
@@ -175,7 +179,7 @@ Each card shows:</p>
       under Apps). <b>Pushover</b>: enter your application API token and your user key.</li>
   <li>Click <b>Send test</b>. You should get a message on your phone within seconds. If it fails,
       the reason appears next to the button.</li>
-  <li>Click <b>Save</b>, then restart Inspector once (see <a href="#restart">section 8</a>),
+  <li>Click <b>Save</b>, then restart Inspector once (see <a href="#restart">section 10</a>),
       because turning a channel on or off is a "requires restart" field.</li>
 </ol>
 <p>You'll get one alert when a container first fails, when Inspector restarts it, and when it
@@ -220,32 +224,160 @@ Inspector to act on it.</p>
 <figure><img src="container-advanced.png" alt="Reachability, Dependencies and Recovery groups">
 <figcaption>Bottom of a container's page: an app behind a VPN container with an HTTP check and stack-redeploy recovery.</figcaption></figure>
 
-<h3>Apps behind a VPN container</h3>
+</section>
-<p>If an app shares a VPN container's network (<code>network_mode: container:vpn</code> or similar), set these on the app's page:</p>
+
+<section id="vpn">
+<h2>6. Apps behind a VPN container</h2>
+<h3>Why these apps need special handling</h3>
+<p>A common setup routes download and indexer apps through a VPN container. Those apps don't get a
+network of their own: their compose file says <code>network_mode: container:&lt;vpn&gt;</code> (or
+<code>service:&lt;vpn&gt;</code>) and all their traffic goes through the VPN container. That causes
+two problems for a watchdog:</p>
+<ul>
+  <li><b>When the VPN breaks, every app behind it breaks at the same time.</b> Restarting the apps
+    does nothing while the tunnel is down. Without help, Inspector would restart each app over and
+    over, use up their hourly restart limits, and flood you with alerts, all for a problem in a
+    different container.</li>
+  <li><b>When the VPN container is recreated</b> (an image update, or someone redeploys its stack),
+    it gets a new container ID. The apps still point at the old one, so a normal restart fails with
+    errors like <i>"No such container"</i> or <i>"joining network namespace"</i>. The only fix is
+    to recreate the apps too, which is what a Portainer stack redeploy does
+    (<a href="#portainer">section 7</a>).</li>
+</ul>
+<h3>How to tell if an app is behind a VPN</h3>
+<ul>
+  <li>In Portainer open <b>Stacks → your stack → Editor</b> and look for
+    <code>network_mode: container:…</code> or <code>network_mode: service:…</code> on the app.</li>
+  <li>Or open <b>Containers → the app</b>: under <b>Network</b> it shows the VPN container instead
+    of a normal network, and it has no ports of its own (they're published on the VPN container).</li>
+</ul>
+<h3>Setting it up</h3>
 <ol class="steps">
-  <li><b>Dependencies → depends_on</b>: pick the VPN container, and turn on <b>vpn_routed</b>.
+  <li><b>Add the VPN container to Inspector and keep it enabled</b> (restart on UNHEALTHY and NOT
-    Inspector checks the VPN first and waits for it to recover before touching the app.</li>
+    RUNNING is a good start). Inspector can only wait for containers it is watching: if the VPN
-  <li><b>Recovery → recovery_action</b>: choose <b>Restart, then redeploy stack if that fails</b>
+    container is disabled, its apps are recovered normally, as if there were no dependency, and the
-    and enter the <b>stack name</b> exactly as Portainer shows it. When the VPN container gets
+    container page shows a warning.</li>
-    recreated, a plain restart of the app fails; redeploying the stack reconnects it.</li>
+  <li>On each app behind it, set <b>Dependencies → depends_on</b> to the VPN container.</li>
+  <li>Turn on <b>vpn_routed</b>. This only changes the log: Inspector writes down when it holds off
+    on the app because the VPN is down. The waiting itself comes from depends_on.</li>
+  <li>Add an <b>HTTP check</b> (<a href="#containers">section 5</a>) using your server's IP and the
+    port published on the VPN container, and tick <b>UNREACHABLE</b>. Docker often still reports
+    these apps as healthy when the tunnel is down; the HTTP check notices.</li>
+  <li>Under <b>Recovery</b>, choose <b>Restart, then redeploy stack if that fails</b> and enter the
+    stack name. This needs the Portainer connection from <a href="#portainer">section 7</a>.</li>
 </ol>
-<p>Stack redeploys need the Portainer connection in <b>Settings → Portainer</b>:</p>
+<h3>What Inspector then does</h3>
+<p>Every check, it looks at the VPN container first. While the VPN is anything other than healthy
+(or starting, or running without a health check), the apps that depend on it are not restarted;
+Inspector fixes the VPN first. Once the VPN is healthy again, the apps are handled normally: a
+restart first, and a stack redeploy if the restart fails or doesn't help.</p>
+<p class="note"><b>depends_on isn't only for VPNs.</b> Use it for any "B needs A" pair, such as an
+app and its database: Inspector won't restart the app while its database is down.</p>
+</section>
+
+<section id="portainer">
+<h2>7. Portainer stack redeploy</h2>
+<h3>Why Inspector needs Portainer</h3>
+<p>Inspector talks to Docker directly, so it can restart or start a container. It can't
+<i>recreate</i> one: that needs the container's compose definition, which lives in Portainer. A
+stack redeploy asks Portainer to do exactly what its <b>Update the stack</b> button does. That's
+how VPN-routed apps get reattached to a recreated VPN container. You only need this if you use one
+of the two "redeploy" recovery actions.</p>
+<p class="note warn"><b>A redeploy affects the whole stack.</b> Portainer pulls the latest images
+and recreates <i>every</i> container in that stack, not just the failing app, so all of them blink
+off for a moment. That's why <b>Restart, then redeploy stack if that fails</b> is the recommended
+choice: most problems are fixed by the plain restart, and the redeploy is only used when that
+doesn't work.</p>
+<h3>Requirements</h3>
+<ul>
+  <li>The app must belong to a stack that was <b>created in Portainer</b>. In <b>Stacks</b>, stacks
+    created elsewhere (for example with <code>docker compose</code> on the command line) are marked
+    <b>Limited</b>, and Portainer can't redeploy them.</li>
+  <li>An access token for a Portainer user who can manage that stack. An administrator's token is
+    the simplest.</li>
+</ul>
+
+<h3>Step 1: find the values</h3>
+<table>
+  <tr><th>Setting</th><th>Where to find it</th></tr>
+  <tr><td>base_url</td><td>The address you open Portainer at, without anything after the port:
+    usually <code>http://&lt;server-ip&gt;:9000</code> or <code>https://&lt;server-ip&gt;:9443</code>.
+    Use the server's IP, not <code>localhost</code>: Inspector runs in its own container.</td></tr>
+  <tr><td>endpoint_id</td><td>On Portainer's <b>Home</b> page, click your environment (often
+    <b>local</b>). The browser address then ends like <code>#!/2/docker/dashboard</code>: the
+    number after <code>#!/</code> is the endpoint ID (here <code>2</code>).</td></tr>
+  <tr><td>stack name</td><td><b>Stacks</b> list, <b>Name</b> column, spelled exactly the same.
+    This goes on each app's container page, not on the Portainer page.</td></tr>
+  <tr><td>verify_ssl</td><td>Leave off for <code>http://</code> and for Portainer's built-in
+    self-signed certificate on 9443. Turn on only if Portainer has a real certificate.</td></tr>
+  <tr><td>API token</td><td>Click your username (top right) → <b>My account</b> →
+    <b>Access tokens</b> → <b>Add access token</b>. Name it <code>inspector</code> and copy the
+    token straight away: Portainer shows it only once.</td></tr>
+</table>
+
+<h3>Step 2: give Inspector the token</h3>
+<p><b>Recommended: an environment variable.</b> The token then never lands in
+<code>config.yml</code> or its backups.</p>
 <ol class="steps">
-  <li>In Portainer, open <b>My account → Access tokens</b> and create a token.</li>
+  <li>In Portainer open <b>Stacks → inspector → Editor</b>.</li>
-  <li>Easiest and safest: add it to the Inspector stack as an environment variable (for example
+  <li>Check that the compose file has this line under <code>environment:</code> (it's in the
-    <code>PORTAINER_API_TOKEN</code>) and redeploy Inspector. Or choose <b>Saved in config.yml</b>
+    compose file from version 0.9.1 on; add it if your stack is older):
-    and paste it in.</li>
+    <code>- PORTAINER_API_TOKEN=${PORTAINER_API_TOKEN:-}</code></li>
-  <li>In <b>Settings → Portainer</b>, add an environment with Portainer's URL and endpoint ID
+  <li>Under <b>Environment variables</b> click <b>Add an environment variable</b>: name
-    (usually 1 or 2; it's the number in the URL when you open the environment in Portainer).
+    <code>PORTAINER_API_TOKEN</code>, value the token.</li>
-    Click <b>Test connection</b>: it should list your stacks.</li>
+  <li>Click <b>Update the stack</b>. Inspector restarts with the token available.</li>
-  <li>Turn Portainer on and save.</li>
+</ol>
+<p><b>Alternative: save it in Inspector.</b> In the next step choose <b>Saved in config.yml</b>
+and paste the token. It is masked in the dashboard, but anyone who can read Inspector's config
+folder (or a backup of it) can read the token.</p>
+
+<h3>Step 3: connect Inspector</h3>
+<ol class="steps">
+  <li>Open <b>Settings → Portainer</b>. Under <b>Add environment</b>, give it a name (your own
+    label, e.g. <code>home</code>) and fill in base_url, endpoint_id and verify_ssl.</li>
+  <li><b>API token stored as</b>: <i>Environment variable</i> with the name
+    <code>PORTAINER_API_TOKEN</code>, or <i>Saved in config.yml</i> with the token.</li>
+  <li>Click <b>Test connection</b>. It should list the stacks on that endpoint; check that your
+    app's stack is there. Then <b>Save new environment</b>.</li>
+  <li>At the top of the page turn <b>enabled</b> on, pick the <b>default_environment</b>, and
+    <b>Save Portainer</b>.</li>
+  <li>On each app's container page, set the recovery action and stack name
+    (<a href="#vpn">section 6</a>). Leave <b>portainer_environment</b> on <i>Default</i> unless
+    you connected more than one Portainer.</li>
 </ol>
 <figure><img src="settings-portainer.png" alt="Portainer settings">
 <figcaption>Settings → Portainer with one environment; the token comes from an environment variable.</figcaption></figure>
+
+<h3>The other settings on the page</h3>
+<table>
+  <tr><th>Setting</th><th>What it does</th></tr>
+  <tr><td>default_environment</td><td>Which connection apps use when they don't pick one. With a
+    single environment you can leave it on Automatic.</td></tr>
+  <tr><td>stack_redeploy_cooldown_seconds</td><td>Minimum time between two redeploys of the same
+    stack (default 300). Several apps often share a stack; this stops them triggering a redeploy
+    each.</td></tr>
+  <tr><td>post_redeploy_wait_seconds</td><td>How long Inspector gives the stack to come up after
+    a redeploy before judging that app again (default 90). Everything else keeps being checked
+    meanwhile.</td></tr>
+</table>
+
+<h3>If Test connection fails</h3>
+<table>
+  <tr><th>Message</th><th>Fix</th></tr>
+  <tr><td>environment variable … is not set</td><td>The compose line from step 2 is missing, or
+    the stack wasn't updated after adding the variable.</td></tr>
+  <tr><td>the API token was rejected</td><td>Token copied wrong, deleted, or from a user without
+    access. Create a new one.</td></tr>
+  <tr><td>no stacks found on endpoint N</td><td>Wrong endpoint ID; check the number in the
+    Portainer address again.</td></tr>
+  <tr><td>request failed …</td><td>Wrong address or port, <code>http</code> vs <code>https</code>
+    mixed up, or <code>localhost</code> used instead of the server IP. With https and a
+    self-signed certificate, turn verify_ssl off.</td></tr>
+</table>
 </section>
 
 <section id="events">
-<h2>6. Events history</h2>
+<h2>8. Events history</h2>
 <p>The <b>Events</b> tab is a day-by-day timeline of failures, restarts, recoveries, mutes, and
 maintenance. Use <b>Prev day</b> / <b>Next day</b> to look back.</p>
 <figure><img src="events.png" alt="Events timeline">
@@ -253,7 +385,7 @@ maintenance. Use <b>Prev day</b> / <b>Next day</b> to look back.</p>
 </section>
 
 <section id="settings">
-<h2>7. Other settings</h2>
+<h2>9. Other settings</h2>
 <figure><img src="settings-inspector.png" alt="Inspector loop settings">
 <figcaption>Settings → Inspector loop.</figcaption></figure>
 <table>
@@ -263,17 +395,33 @@ maintenance. Use <b>Prev day</b> / <b>Next day</b> to look back.</p>
   <tr><td>Dashboard</td><td>Login username and password for this web UI.</td></tr>
   <tr><td>Event history</td><td>How many days of events to keep.</td></tr>
   <tr><td>Health summary</td><td>A periodic digest (e.g. daily) of what happened, sent through your notification channels.</td></tr>
-  <tr><td>Maintenance</td><td>A daily quiet window (e.g. 02:00–05:00) so nightly backups or updates don't trigger restarts. Turn on <b>maintenance_window</b> on each container that should follow it.</td></tr>
+  <tr><td>Maintenance</td><td>A daily quiet window (e.g. 02:00–05:00, in your <a href="#settings">time zone</a>) so nightly backups or updates don't trigger restarts. Turn on <b>maintenance_window</b> on each container that should follow it.</td></tr>
   <tr><td>Notification mute</td><td>Turns the per-container <b>Mute notifications</b> buttons on or off, and sets how long a mute lasts.</td></tr>
   <tr><td>Uptime Kuma</td><td>Connection to your Uptime Kuma status page, used by container reachability checks.</td></tr>
-  <tr><td>Portainer</td><td>Connection to Portainer, used to redeploy stacks. See <a href="#containers">Apps behind a VPN container</a>.</td></tr>
+  <tr><td>Portainer</td><td>Connection to Portainer, used to redeploy stacks. See <a href="#portainer">section 7</a>.</td></tr>
 </table>
-<p>At the bottom of every settings page is a strip showing where the config file lives and
+<p>At the bottom of every settings page is a strip showing where the config file lives,
-whether Inspector can write to it.</p>
+whether Inspector can write to it, and which time zone it is using.</p>
+
+<h3>Time zone</h3>
+<p>Inspector uses the <code>TZ</code> setting of its Portainer stack for every time it shows or acts on:</p>
+<ul>
+  <li><b>The maintenance window runs in this zone.</b> A 02:00–05:00 window with the wrong zone
+    runs hours off, so Inspector could restart containers during your backups and ignore
+    problems at other times.</li>
+  <li>Alert times (with the zone, e.g. <code>03:15 AM CET</code>), dashboard times, the Events
+    page's days (midnight to midnight), and logs.</li>
+</ul>
+<p>To change it: in Portainer open <b>Stacks → inspector → Editor</b>, set the <code>TZ</code>
+environment variable to your zone's name, e.g. <code>America/New_York</code>,
+<code>Europe/London</code> or <code>Australia/Sydney</code> (names from the
+<a href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones">list of time zones</a>;
+abbreviations like <code>EST</code> don't work), then click <b>Update the stack</b>. Without
+<code>TZ</code>, Inspector uses UTC.</p>
 </section>
 
 <section id="restart">
-<h2>8. "Requires restart" fields</h2>
+<h2>10. "Requires restart" fields</h2>
 <p>Most changes apply on the next check. Fields marked
 <span class="tag t-violet">REQUIRES RESTART</span> (like turning a notification channel or the
 dashboard on or off) only take effect after Inspector restarts:</p>
@@ -285,7 +433,7 @@ dashboard on or off) only take effect after Inspector restarts:</p>
 </section>
 
 <section id="trouble">
-<h2>9. Troubleshooting</h2>
+<h2>11. Troubleshooting</h2>
 <table>
   <tr><th>Problem</th><th>Fix</th></tr>
   <tr><td>Red <b>READ-ONLY</b> badge at the bottom of Settings</td>

src/inspector/config.py

@@ -1,10 +1,12 @@
 from __future__ import annotations
 
 import io
+import logging
 import os
 import shutil
 import threading
 from dataclasses import dataclass, field
+from datetime import time
 from pathlib import Path
 
 import yaml
@@ -23,6 +25,30 @@ VALID_STATUSES = {
     "UNREACHABLE",
 }
 
+log = logging.getLogger("inspector.config")
+
+# Names logging.setLevel() accepts; anything else would crash at startup.
+VALID_LOG_LEVELS = {"CRITICAL", "FATAL", "ERROR", "WARN", "WARNING", "INFO", "DEBUG", "NOTSET"}
+
+
+def valid_hhmm(value: str) -> bool:
+    """True if `value` parses the way the maintenance tracker parses it ("HH:MM")."""
+    try:
+        hour, minute = str(value).split(":")
+        time(int(hour), int(minute))
+        return True
+    except (TypeError, ValueError):
+        return False
+
+
+def _startup_safe(value, default, ok: bool, key: str):
+    """Return `value`, or `default` with a warning when it would crash Inspector."""
+    if ok:
+        return value
+    log.warning("config: invalid %s %r; using %r instead", key, value, default)
+    return default
+
+
 VALID_RECOVERY_ACTIONS = {
     "restart_container",
     "start_container",
@@ -190,9 +216,11 @@ def build_config_from_raw(raw: dict) -> AppConfig:
     to validate an edited raw dict before writing it back to disk.
     """
     insp_raw = raw.get("inspector", {}) or {}
+    interval = int(insp_raw.get("interval_seconds", 60))
+    log_level = str(insp_raw.get("log_level", "INFO")).upper()
     inspector = InspectorConfig(
-        interval_seconds=int(insp_raw.get("interval_seconds", 60)),
+        interval_seconds=_startup_safe(interval, 1, interval >= 1, "inspector.interval_seconds"),
-        log_level=str(insp_raw.get("log_level", "INFO")).upper(),
+        log_level=_startup_safe(log_level, "INFO", log_level in VALID_LOG_LEVELS, "inspector.log_level"),
         dry_run=bool(insp_raw.get("dry_run", False)),
         log_dir=str(insp_raw.get("log_dir", "/app/logs")),
         log_filename=str(insp_raw.get("log_filename", "inspector.log")),
@@ -237,10 +265,12 @@ def build_config_from_raw(raw: dict) -> AppConfig:
     )
 
     maint_raw = raw.get("maintenance") or {}
+    maint_start = str(maint_raw.get("start", "00:00"))
+    maint_end = str(maint_raw.get("end", "06:00"))
     maintenance = MaintenanceConfig(
         enabled=bool(maint_raw.get("enabled", False)),
-        start=str(maint_raw.get("start", "00:00")),
+        start=_startup_safe(maint_start, "00:00", valid_hhmm(maint_start), "maintenance.start"),
-        end=str(maint_raw.get("end", "06:00")),
+        end=_startup_safe(maint_end, "06:00", valid_hhmm(maint_end), "maintenance.end"),
         dir=str(maint_raw.get("dir", "/app/data/maintenance")),
         max_hours=int(maint_raw.get("max_hours", 8)),
     )

src/inspector/dashboard.py

@@ -1,5 +1,7 @@
 from __future__ import annotations
 
+import functools
+import hashlib
 import json
 import logging
 import os
@@ -21,12 +23,15 @@ from .config import (
     AppConfig,
     ConfigRef,
     ContainerConfig,
+    VALID_LOG_LEVELS,
     HttpCheckConfig,
     UptimeKumaMonitorConfig,
     build_config_from_raw,
+    valid_hhmm,
     write_config_raw,
 )
-from .formatting import PACIFIC, format_timestamp
+from . import formatting
+from .formatting import format_timestamp
 from .health import CONTAINER_NOT_FOUND, ERROR, HEALTHY, NOT_RUNNING, UNHEALTHY, UNREACHABLE
 from .maintenance import MaintenanceTracker
 from .notification_mute import NotificationMuteTracker
@@ -36,6 +41,9 @@ from .state import ContainerState, utcnow
 log = logging.getLogger("inspector.dashboard")
 
 _SESSION_MAX_AGE = 86400  # seconds a login cookie stays valid
+_MAX_BODY_BYTES = 1024 * 1024  # largest request body accepted
+_LOGIN_MAX_FAILURES = 5  # failed logins per client before it is throttled
+_LOGIN_FAILURE_WINDOW = 300  # seconds a failed login counts toward the limit
 _UNCHANGED_SECRET_PLACEHOLDER = "__UNCHANGED__"  # UI sentinel: keep existing secret value
 
 # Config keys that require an Inspector container restart to take effect.
@@ -84,7 +92,13 @@ def _color_map(
     states: dict[str, ContainerState],
     containers: dict[str, ContainerConfig],
 ) -> dict[str, str]:
-    return {name: _resolve_color(containers[name], i) for i, name in enumerate(states)}
+    # list() snapshot + skip: the inspector loop adds/removes states from another
+    # thread, and a container removed in the UI keeps its state until the next check.
+    return {
+        name: _resolve_color(containers[name], i)
+        for i, name in enumerate(list(states))
+        if name in containers
+    }
 
 
 def _compute_phase(
@@ -167,20 +181,20 @@ def _status_snapshot(
 
 
 def _parse_date_param(value: str | None) -> date:
-    """Parse a ?date=YYYY-MM-DD query param; falls back to "today" in
+    """Parse a ?date=YYYY-MM-DD query param; falls back to "today" in the
-    America/Los_Angeles on missing/invalid input."""
+    configured time zone on missing/invalid input."""
     if value:
         try:
             return date.fromisoformat(value)
         except ValueError:
             pass
-    return datetime.now(PACIFIC).date()
+    return datetime.now(formatting.LOCAL_TZ).date()
 
 
 def _day_bounds_utc(day: date) -> tuple[datetime, datetime]:
-    """UTC [start, end) bounds for a Pacific calendar day, extended one hour
+    """UTC [start, end) bounds for a local calendar day, extended one hour
     into the previous day for the lookback-overlap."""
-    midnight = datetime.combine(day, datetime.min.time(), tzinfo=PACIFIC)
+    midnight = datetime.combine(day, datetime.min.time(), tzinfo=formatting.LOCAL_TZ)
     start = (midnight - timedelta(hours=1)).astimezone(timezone.utc)
     end = (midnight + timedelta(days=1)).astimezone(timezone.utc)
     return start, end
@@ -205,8 +219,8 @@ def _read_events_range(db_path: str, start: datetime, end: datetime) -> list[dic
 
 
 def _hour_markers(day: date) -> list[datetime]:
-    """24 Pacific-local hour boundaries for `day`, 00:00..23:00 ascending."""
+    """24 local hour boundaries for `day`, 00:00..23:00 ascending."""
-    midnight = datetime.combine(day, datetime.min.time(), tzinfo=PACIFIC)
+    midnight = datetime.combine(day, datetime.min.time(), tzinfo=formatting.LOCAL_TZ)
     return [midnight + timedelta(hours=h) for h in range(24)]
 
 
@@ -226,7 +240,7 @@ def _group_events_by_hour(
 
     for ev in events:
         try:
-            ts = datetime.fromisoformat(ev["ts"]).astimezone(PACIFIC)
+            ts = datetime.fromisoformat(ev["ts"]).astimezone(formatting.LOCAL_TZ)
         except (ValueError, KeyError):
             continue
         if prev_hour_start <= ts < markers[0]:
@@ -246,9 +260,31 @@ def _escape(value: object) -> str:
         .replace("<", "&lt;")
         .replace(">", "&gt;")
         .replace('"', "&quot;")
+        .replace("'", "&#x27;")
     )
 
 
+def _js_string_attr(text: str) -> str:
+    """A JS string literal safe to put inside a double-quoted HTML attribute."""
+    return _escape(json.dumps(text))
+
+
+def _creds_match(username: str, password: str, cfg) -> bool:
+    """Constant-time credential check. Never accepts an empty configured
+    password, and works for non-ASCII input (compare_digest on str doesn't)."""
+    if not cfg.password:
+        return False
+    user_ok = secrets.compare_digest(username.encode("utf-8"), cfg.username.encode("utf-8"))
+    pass_ok = secrets.compare_digest(password.encode("utf-8"), cfg.password.encode("utf-8"))
+    return user_ok and pass_ok
+
+
+def _cred_fingerprint(cfg) -> str:
+    """Changes whenever the dashboard username or password changes, which
+    invalidates every session created with the old credentials."""
+    return hashlib.sha256(f"{cfg.username}\0{cfg.password}".encode("utf-8")).hexdigest()
+
+
 _STATUS_BADGE_CLASS = {
     HEALTHY: "healthy",
     UNHEALTHY: "unhealthy",
@@ -1076,12 +1112,15 @@ def _render_events_page(
 
     prev_day = (selected_day - timedelta(days=1)).isoformat()
     next_day = (selected_day + timedelta(days=1)).isoformat()
-    today = datetime.now(PACIFIC).date()
+    today = datetime.now(formatting.LOCAL_TZ).date()
     day_label = selected_day.strftime("%A, %B %-d, %Y")
 
     parts.append('<div class="events-nav">\n')
     parts.append(f'<a class="day-nav" href="/events?date={prev_day}">&larr; Prev day</a>\n')
-    parts.append(f'<span class="day-label">{_escape(day_label)}</span>\n')
+    parts.append(
+        f'<span class="day-label">{_escape(day_label)}'
+        f' <span style="color:var(--muted); font-weight:400; font-size:0.8em;">· times in {_escape(formatting.LOCAL_TZ_NAME)}</span></span>\n'
+    )
     if selected_day >= today:
         parts.append('<span class="day-nav disabled">Next day &rarr;</span>\n')
     else:
@@ -1146,10 +1185,13 @@ def _render_event_item(ev: dict, container_colors: dict[str, str] | None) -> str
     )
 
 
-def _render_login_page(error: bool = False) -> bytes:
+def _render_login_page(error: bool = False, throttled: bool = False) -> bytes:
-    error_html = (
+    if throttled:
-        '<div class="login-error">Incorrect username or password.</div>\n' if error else ""
+        error_html = '<div class="login-error">Too many failed sign-ins. Try again in a few minutes.</div>\n'
-    )
+    elif error:
+        error_html = '<div class="login-error">Incorrect username or password.</div>\n'
+    else:
+        error_html = ""
     head = (
         "<!DOCTYPE html>\n"
         '<html lang="en">\n<head>\n'
@@ -1243,6 +1285,14 @@ def _form_float(form: dict, key: str, default: float = 0.0) -> float:
         return default
 
 
+def _int_in(form: dict, key: str, default: int, lo: int, hi: int) -> int:
+    """Read an int form field and reject values outside lo..hi."""
+    value = _form_int(form, key, default)
+    if not lo <= value <= hi:
+        raise _SettingsError(f"{key} must be between {lo} and {hi} (got {value})")
+    return value
+
+
 def _set_or_drop(section: dict, key: str, value) -> None:
     """Store value, or remove the key when it is blank/False so config.yml
     doesn't fill up with empty defaults."""
@@ -1270,8 +1320,10 @@ def _apply_container_advanced(raw: dict, name: str, cfg: dict, form: dict) -> No
         hc["enabled"] = hc_enabled
         hc["url"] = hc_url
         timeout = _form_float(form, "http_check_timeout_seconds", 5.0)
+        if not 0.5 <= timeout <= 120:
+            raise _SettingsError(f"HTTP check timeout must be between 0.5 and 120 seconds (got {timeout:g})")
         hc["timeout_seconds"] = int(timeout) if timeout.is_integer() else timeout
-        hc["expected_status"] = _form_int(form, "http_check_expected_status", 200)
+        hc["expected_status"] = _int_in(form, "http_check_expected_status", 200, 100, 599)
         cfg["http_check"] = hc
     else:
         cfg.pop("http_check", None)
@@ -1314,6 +1366,15 @@ def _apply_container_advanced(raw: dict, name: str, cfg: dict, form: dict) -> No
         cfg.pop("portainer_stack_name", None)
 
 
+_PORTAINER_ENV_NAME_RE = re.compile(r"^PORTAINER_[A-Z0-9_]+$")
+
+
+def _token_env_allowed(name: str, saved: str = "") -> bool:
+    """Only PORTAINER_* variables (or the name already in config.yml) may be read
+    as a token, so the dashboard can't be used to send other container secrets out."""
+    return bool(_PORTAINER_ENV_NAME_RE.match(name)) or (bool(saved) and name == saved)
+
+
 def _apply_portainer_env(raw: dict, form: dict) -> None:
     """Add, edit, rename or delete one integrations.portainer.environments entry."""
     pt = raw.setdefault("integrations", {}).setdefault("portainer", {})
@@ -1350,7 +1411,7 @@ def _apply_portainer_env(raw: dict, form: dict) -> None:
 
     env = envs.get(original) or {}
     env["base_url"] = base_url
-    env["endpoint_id"] = _form_int(form, "endpoint_id", 1)
+    env["endpoint_id"] = _int_in(form, "endpoint_id", 1, 1, 1_000_000)
     env["verify_ssl"] = _form_bool(form, "verify_ssl")
     if _form_str(form, "token_source", "env") == "inline":
         _apply_secret(form, env, "api_token", "api_token")
@@ -1361,6 +1422,8 @@ def _apply_portainer_env(raw: dict, form: dict) -> None:
         token_env = _form_str(form, "api_token_env", "").strip()
         if not token_env:
             raise _SettingsError("enter the name of the environment variable holding the API token")
+        if not _token_env_allowed(token_env, env.get("api_token_env", "")):
+            raise _SettingsError("the environment variable name must start with PORTAINER_ (e.g. PORTAINER_API_TOKEN)")
         env["api_token_env"] = token_env
         env.pop("api_token", None)
 
@@ -1376,57 +1439,81 @@ def _apply_portainer_env(raw: dict, form: dict) -> None:
     pt["environments"] = envs
 
 
+_SAVE_LOCK = threading.Lock()
+
+
+def _serialized(fn):
+    """Run config read-modify-write functions one at a time, so two saves at
+    the same moment can't overwrite each other's changes."""
+    @functools.wraps(fn)
+    def wrapper(*args, **kwargs):
+        with _SAVE_LOCK:
+            return fn(*args, **kwargs)
+    return wrapper
+
+
+@_serialized
 def _apply_settings_update(config_ref: ConfigRef, section: str, form: dict) -> None:
     """Validate the form, merge into the raw config, write atomically, swap ref."""
     raw = config_ref.get_raw()
 
     if section == "inspector":
         insp = raw.setdefault("inspector", {})
-        insp["interval_seconds"] = _form_int(form, "interval_seconds", 60)
+        insp["interval_seconds"] = _int_in(form, "interval_seconds", 60, 1, 86400)
-        insp["log_level"] = _form_str(form, "log_level", "INFO").upper()
+        level = _form_str(form, "log_level", "INFO").strip().upper()
+        if level not in VALID_LOG_LEVELS:
+            raise _SettingsError("log_level must be one of DEBUG, INFO, WARNING, ERROR, CRITICAL")
+        insp["log_level"] = level
         insp["dry_run"] = _form_bool(form, "dry_run")
         insp["heartbeat"] = _form_bool(form, "heartbeat")
-        insp["log_retention_days"] = _form_int(form, "log_retention_days", 30)
+        insp["log_retention_days"] = _int_in(form, "log_retention_days", 30, 1, 3650)
     elif section == "gotify":
         notif = raw.setdefault("notifications", {})
         gotify = notif.setdefault("gotify", {})
         gotify["enabled"] = _form_bool(form, "enabled")
         gotify["url"] = _form_str(form, "url", "")
         _apply_secret(form, gotify, "token", "token")
-        gotify["priority"] = _form_int(form, "priority", 5)
+        gotify["priority"] = _int_in(form, "priority", 5, 0, 10)
     elif section == "pushover":
         notif = raw.setdefault("notifications", {})
         pushover = notif.setdefault("pushover", {})
         pushover["enabled"] = _form_bool(form, "enabled")
         _apply_secret(form, pushover, "token", "token")
         _apply_secret(form, pushover, "user_key", "user_key")
-        pushover["priority"] = _form_int(form, "priority", 5)
+        pushover["priority"] = _int_in(form, "priority", 5, 0, 10)
         pushover["device"] = _form_str(form, "device", "")
         pushover["sound"] = _form_str(form, "sound", "")
     elif section == "dashboard":
         dash = raw.setdefault("dashboard", {})
         dash["enabled"] = _form_bool(form, "enabled")
-        dash["username"] = _form_str(form, "username", "admin")
+        dash["username"] = _form_str(form, "username", "admin").strip()
+        if not dash["username"]:
+            raise _SettingsError("the dashboard username can't be empty")
         _apply_secret(form, dash, "password", "password")
+        if not dash.get("password"):
+            raise _SettingsError("the dashboard password can't be empty")
     elif section == "database":
         db = raw.setdefault("database", {})
         db["enabled"] = _form_bool(form, "enabled")
-        db["retention_days"] = _form_int(form, "retention_days", 30)
+        db["retention_days"] = _int_in(form, "retention_days", 30, 1, 3650)
     elif section == "health_summary":
         hs = raw.setdefault("health_summary", {})
         hs["enabled"] = _form_bool(form, "enabled")
-        hs["interval_hours"] = _form_int(form, "interval_hours", 24)
+        hs["interval_hours"] = _int_in(form, "interval_hours", 24, 1, 8760)
-        hs["priority"] = _form_int(form, "priority", 3)
+        hs["priority"] = _int_in(form, "priority", 3, 0, 10)
     elif section == "maintenance":
         m = raw.setdefault("maintenance", {})
         m["enabled"] = _form_bool(form, "enabled")
-        m["start"] = _form_str(form, "start", "00:00")
+        for key, default in (("start", "00:00"), ("end", "06:00")):
-        m["end"] = _form_str(form, "end", "06:00")
+            value = _form_str(form, key, default).strip()
-        m["max_hours"] = _form_int(form, "max_hours", 8)
+            if not valid_hhmm(value):
+                raise _SettingsError(f"{key} must be a 24-hour time like 02:30 (got {value!r})")
+            m[key] = value
+        m["max_hours"] = _int_in(form, "max_hours", 8, 1, 720)
     elif section == "notification_mute":
         nm = raw.setdefault("notification_mute", {})
         nm["enabled"] = _form_bool(form, "enabled")
-        nm["default_hours"] = _form_int(form, "default_hours", 12)
+        nm["default_hours"] = _int_in(form, "default_hours", 12, 1, 720)
     elif section.startswith("container:"):
         name = section.split(":", 1)[1]
         containers = raw.get("containers") or {}
@@ -1434,10 +1521,10 @@ def _apply_settings_update(config_ref: ConfigRef, section: str, form: dict) -> N
             raise _SettingsError(f"unknown container {name!r}")
         cfg = containers[name] or {}
         cfg["enabled"] = _form_bool(form, "enabled")
-        cfg["max_error_count"] = _form_int(form, "max_error_count", 5)
+        cfg["max_error_count"] = _int_in(form, "max_error_count", 5, 1, 1000)
-        cfg["cooldown_seconds"] = _form_int(form, "cooldown_seconds", 300)
+        cfg["cooldown_seconds"] = _int_in(form, "cooldown_seconds", 300, 0, 86400)
-        cfg["grace_period_seconds"] = _form_int(form, "grace_period_seconds", 120)
+        cfg["grace_period_seconds"] = _int_in(form, "grace_period_seconds", 120, 0, 86400)
-        cfg["max_restarts_per_hour"] = _form_int(form, "max_restarts_per_hour", 3)
+        cfg["max_restarts_per_hour"] = _int_in(form, "max_restarts_per_hour", 3, 1, 100)
         _set_or_drop(cfg, "color", _form_str(form, "color", "").strip())
         if form.get("restart_on_present"):  # only our own form carries this field
             _set_or_drop(cfg, "maintenance_window", _form_bool(form, "maintenance_window"))
@@ -1467,8 +1554,8 @@ def _apply_settings_update(config_ref: ConfigRef, section: str, form: dict) -> N
         if default_env and default_env not in (pt.get("environments") or {}):
             raise _SettingsError(f"unknown Portainer environment {default_env!r}")
         _set_or_drop(pt, "default_environment", default_env)
-        pt["stack_redeploy_cooldown_seconds"] = _form_int(form, "stack_redeploy_cooldown_seconds", 300)
+        pt["stack_redeploy_cooldown_seconds"] = _int_in(form, "stack_redeploy_cooldown_seconds", 300, 0, 86400)
-        pt["post_redeploy_wait_seconds"] = _form_int(form, "post_redeploy_wait_seconds", 90)
+        pt["post_redeploy_wait_seconds"] = _int_in(form, "post_redeploy_wait_seconds", 90, 0, 3600)
     elif section == "portainer_env":
         _apply_portainer_env(raw, form)
     else:
@@ -1492,6 +1579,7 @@ def _apply_settings_update(config_ref: ConfigRef, section: str, form: dict) -> N
 _CONTAINER_NAME_RE = re.compile(r"^[a-zA-Z0-9][a-zA-Z0-9_-]{0,62}$")
 
 
+@_serialized
 def _apply_container_create(config_ref: ConfigRef, form: dict) -> str:
     """Insert a new container under raw['containers']. Returns the new name."""
     name = _form_str(form, "name", "").strip()
@@ -1507,10 +1595,10 @@ def _apply_container_create(config_ref: ConfigRef, form: dict) -> str:
 
     cfg = {
         "enabled": _form_bool(form, "enabled"),
-        "max_error_count": _form_int(form, "max_error_count", 5),
+        "max_error_count": _int_in(form, "max_error_count", 5, 1, 1000),
-        "cooldown_seconds": _form_int(form, "cooldown_seconds", 300),
+        "cooldown_seconds": _int_in(form, "cooldown_seconds", 300, 0, 86400),
-        "grace_period_seconds": _form_int(form, "grace_period_seconds", 120),
+        "grace_period_seconds": _int_in(form, "grace_period_seconds", 120, 0, 86400),
-        "max_restarts_per_hour": _form_int(form, "max_restarts_per_hour", 3),
+        "max_restarts_per_hour": _int_in(form, "max_restarts_per_hour", 3, 1, 100),
         "color": _form_str(form, "color", ""),
         "maintenance_window": _form_bool(form, "maintenance_window"),
     }
@@ -1536,6 +1624,7 @@ def _apply_container_create(config_ref: ConfigRef, form: dict) -> str:
     return name
 
 
+@_serialized
 def _apply_container_delete(config_ref: ConfigRef, name: str) -> None:
     raw = config_ref.get_raw()
     containers = raw.get("containers") or {}
@@ -1583,7 +1672,7 @@ def _run_test_notification(channel: str, form: dict, app: AppConfig) -> dict:
         try:
             resp = requests.post(
                 f"{url}/message",
-                params={"token": token},
+                headers={"X-Gotify-Key": token},
                 json={"title": title, "message": message, "priority": priority},
                 timeout=5.0,
             )
@@ -1665,6 +1754,9 @@ def _run_test_integration(kind: str, form: dict, app: AppConfig) -> dict:
                 return {"ok": False, "error": "API token required"}
         else:
             var = _form_str(form, "api_token_env", "").strip()
+            saved = app.integrations.portainer.environments.get(_form_str(form, "env_original", ""))
+            if var and not _token_env_allowed(var, saved.api_token_env if saved else ""):
+                return {"ok": False, "error": "the environment variable name must start with PORTAINER_"}
             token = os.environ.get(var, "") if var else ""
             if not token:
                 return {"ok": False, "error": f"environment variable {var!r} is not set in the Inspector container"}
@@ -1974,6 +2066,7 @@ def _render_diag_strip(config_ref: ConfigRef) -> str:
     return (
         '<div class="diag-strip">'
         f'<span>config: <code>{_escape(str(path))}</code></span>'
+        f'<span>time zone: <code>{_escape(formatting.LOCAL_TZ_NAME)}</code></span>'
         f"<span>{badge}{hint}</span>"
         f'<span style="margin-left:auto;">Inspector v{__version__}</span>'
         "</div>\n"
@@ -2113,6 +2206,8 @@ def _settings_body_for(section: str, app: AppConfig, csrf_token: str) -> str:
         return (
             '<h3 class="pane-title">Scheduled maintenance window</h3>'
             '<p class="pane-sub">Daily quiet hours. Containers that opt in (<code>maintenance_window: true</code> in their config) are not acted on during the window.</p>'
+            f'<p class="pane-sub" style="margin-top:-1rem;">Times are in <b>{_escape(formatting.LOCAL_TZ_NAME)}</b>, '
+            "from the <code>TZ</code> setting of the Inspector stack. If that's not your time zone, the window runs at the wrong hours.</p>"
             + _settings_form("maintenance", "Maintenance", body, csrf_token)
         )
 
@@ -2177,7 +2272,7 @@ def _portainer_env_form(env_name: str, env, csrf_token: str, *, suggest_name: st
         + _settings_field("name", "env_name", env_name or suggest_name,
                           hint="Your own label, referenced by containers")
         + _settings_field("endpoint_id", "endpoint_id", str(env.endpoint_id if env else 1), kind="number",
-                          hint="Portainer → Environments; the number in the URL (usually 1 or 2)")
+                          hint="Open the environment from Portainer's Home page; the number after #!/ in the address (often 1 or 2)")
         + "</div>"
         + _settings_field("base_url", "base_url", env.base_url if env else "",
                           hint="e.g. http://192.168.1.10:9000 or https://portainer.example.com")
@@ -2190,7 +2285,7 @@ def _portainer_env_form(env_name: str, env, csrf_token: str, *, suggest_name: st
         + f'<div class="token-src" data-src="env"{" hidden" if inline else ""}>'
         + _settings_field("environment variable name", "api_token_env",
                           (env.api_token_env if env else "") or "PORTAINER_API_TOKEN",
-                          hint="Set this variable on the Inspector container (Portainer → stack → Environment variables), then redeploy Inspector.")
+                          hint="Add it to the Inspector stack's environment variables; the compose file must pass it in. Step by step: Help → Portainer stack redeploy, step 2.")
         + "</div>"
         + f'<div class="token-src" data-src="inline"{"" if inline else " hidden"}>'
         + _settings_secret_field("api_token", "api_token", bool(env and env.api_token))
@@ -2203,7 +2298,7 @@ def _portainer_env_form(env_name: str, env, csrf_token: str, *, suggest_name: st
     if env is not None:
         delete = (
             '<button type="submit" name="delete" value="1" class="btn-danger" '
-            f"onclick=\"return confirm('Delete Portainer environment {_escape(env_name)}?');\">Delete</button>"
+            f'onclick="return confirm({_js_string_attr(f"Delete Portainer environment {env_name}?")});">Delete</button>'
         )
     label = "environment" if env is not None else "new environment"
     return (
@@ -2440,7 +2535,7 @@ def _render_container_advanced(name: str, cfg, app: AppConfig) -> str:
         + '<div class="grid-2">'
         + _settings_field("timeout_seconds", "http_check_timeout_seconds", timeout_str, kind="number")
         + _settings_field("expected_status", "http_check_expected_status", str(hc.expected_status), kind="number",
-                          hint="Exact HTTP code a healthy service returns (often 200; some apps return 401 or 302)")
+                          hint="Exact HTTP code a healthy service returns (often 200; some apps return 401). Redirects are followed, so use the final page's code.")
         + "</div></div>"
         '<div class="form-group"><h4>Uptime Kuma monitor</h4>'
         + _settings_field("enabled", "uptime_kuma_enabled", "on" if ukm.enabled else "", kind="switch")
@@ -2451,18 +2546,25 @@ def _render_container_advanced(name: str, cfg, app: AppConfig) -> str:
     )
 
     others = [c.name for c in app.containers if c.name != name]
+    disabled = {c.name for c in app.containers if not c.enabled}
     dep_value = getattr(cfg, "depends_on", "") or ""
-    dep_options = [("", "— none —")] + [(n, n) for n in others]
+    dep_options = [("", "— none —")] + [(n, n + (" (disabled)" if n in disabled else "")) for n in others]
     if dep_value and dep_value not in others:
         dep_options.append((dep_value, f"{dep_value} (not configured)"))
+    dep_warn = ""
+    if dep_value in disabled:
+        dep_warn = _warn(f"{_escape(dep_value)} is disabled, so Inspector can't see its status and won't wait for it. "
+                         "Enable it to make this dependency count.")
     deps = (
         '<div class="form-group"><h4>Dependencies</h4>'
         '<p class="group-sub">Check this container after the one it relies on, and hold off recovering it '
         "while that one is still failing.</p>"
         + _settings_select("depends_on", "depends_on", dep_value, dep_options,
-                           hint="e.g. the VPN container, for apps that use network_mode: container:<vpn>")
+                           hint="e.g. the VPN container, for apps that use network_mode: container:<vpn>. "
+                                "Also works for any other dependency, like an app and its database.")
+        + dep_warn
         + _settings_field("vpn_routed", "vpn_routed", "on" if getattr(cfg, "vpn_routed", False) else "", kind="switch",
-                          hint="Routes through the container above. Logs why recovery is deferred while it is down.")
+                          hint="Only affects logging: says in the log when recovery waits on the VPN container. The waiting itself comes from depends_on.")
         + "</div>"
     )
 
@@ -2573,7 +2675,7 @@ def _render_container_form(
         delete_btn = (
             f'<form method="post" action="/containers/{_escape(name)}/delete" '
             'style="display:inline;" '
-            f"onsubmit=\"return confirm('Delete container {_escape(name)} from config.yml?');\">"
+            f'onsubmit="return confirm({_js_string_attr(f"Delete container {name} from config.yml?")});">'
             f'<input type="hidden" name="csrf" value="{_escape(csrf_token)}">'
             '<button type="submit" class="btn-danger">Delete container</button>'
             "</form>"
@@ -2677,8 +2779,39 @@ class _DashboardHTTPServer(ThreadingHTTPServer):
         self.states = states
         self.maintenance = maintenance
         self.notification_mute = notification_mute
-        # token -> (expiry_timestamp, csrf_token)
+        # token -> (expiry_timestamp, csrf_token, credential fingerprint)
-        self._sessions: dict[str, tuple[float, str]] = {}
+        self._sessions: dict[str, tuple[float, str, str]] = {}
+        # client address -> timestamps of recent failed logins
+        self._failed_logins: dict[str, list[float]] = {}
+        self._failed_lock = threading.Lock()
+
+    def login_throttled(self, client: str) -> bool:
+        cutoff = time.time() - _LOGIN_FAILURE_WINDOW
+        with self._failed_lock:
+            recent = [t for t in self._failed_logins.get(client, []) if t > cutoff]
+            if recent:
+                self._failed_logins[client] = recent
+            else:
+                self._failed_logins.pop(client, None)
+            return len(recent) >= _LOGIN_MAX_FAILURES
+
+    def note_login_failure(self, client: str) -> None:
+        with self._failed_lock:
+            self._failed_logins.setdefault(client, []).append(time.time())
+
+    def clear_login_failures(self, client: str) -> None:
+        with self._failed_lock:
+            self._failed_logins.pop(client, None)
+
+    def new_session(self) -> str:
+        now = time.time()
+        for tok, entry in list(self._sessions.items()):  # drop expired sessions
+            if entry[0] <= now:
+                self._sessions.pop(tok, None)
+        token = secrets.token_urlsafe(32)
+        fp = _cred_fingerprint(self.current_app().dashboard)
+        self._sessions[token] = (now + _SESSION_MAX_AGE, secrets.token_urlsafe(32), fp)
+        return token
 
     def current_app(self) -> AppConfig:
         return self.config_ref.get()
@@ -2703,29 +2836,47 @@ class _Handler(BaseHTTPRequestHandler):
     def _is_authenticated(self) -> bool:
         # Session cookie
         now = time.time()
+        cfg = self.server.current_app().dashboard
         token = self._session_token()
         if token:
             entry = self.server._sessions.get(token)
-            if entry and now < entry[0]:
+            if entry and now < entry[0] and entry[2] == _cred_fingerprint(cfg):
                 return True
             self.server._sessions.pop(token, None)
 
         # Basic Auth
         header = self.headers.get("Authorization", "")
         if header.startswith("Basic "):
+            client = self.client_address[0]
+            if self.server.login_throttled(client):
+                return False
             try:
                 decoded = b64decode(header[len("Basic "):]).decode("utf-8")
                 username, _, password = decoded.partition(":")
             except Exception:
                 username, password = "", ""
-            cfg = self.server.current_app().dashboard
+            if _creds_match(username, password, cfg):
-            if secrets.compare_digest(username, cfg.username) and secrets.compare_digest(
+                self.server.clear_login_failures(client)
-                password, cfg.password
-            ):
                 return True
+            self.server.note_login_failure(client)
 
         return False
 
+    def _read_form(self) -> dict | None:
+        """Parse the urlencoded request body, or send 400/413 and return None."""
+        try:
+            length = int(self.headers.get("Content-Length", 0))
+        except ValueError:
+            length = -1
+        if length < 0:
+            self._send_bytes(HTTPStatus.BAD_REQUEST, "text/plain; charset=utf-8", b"bad Content-Length")
+            return None
+        if length > _MAX_BODY_BYTES:
+            self._send_bytes(HTTPStatus.REQUEST_ENTITY_TOO_LARGE, "text/plain; charset=utf-8", b"request too large")
+            return None
+        raw = self.rfile.read(length) if length > 0 else b""
+        return parse_qs(raw.decode("utf-8", errors="replace"))
+
     def _csrf_token_for_session(self) -> str:
         """Return the CSRF token bound to the current session, or '' if none."""
         token = self._session_token()
@@ -2883,18 +3034,21 @@ class _Handler(BaseHTTPRequestHandler):
         server = self.server
 
         if path == "/login":
-            length = int(self.headers.get("Content-Length", 0))
+            data = self._read_form()
-            raw = self.rfile.read(length) if length > 0 else b""
+            if data is None:
-            data = parse_qs(raw.decode("utf-8", errors="replace"))
+                return
+            client = self.client_address[0]
+            if server.login_throttled(client):
+                self._send_bytes(
+                    HTTPStatus.TOO_MANY_REQUESTS, "text/html; charset=utf-8", _render_login_page(throttled=True)
+                )
+                return
             username = data.get("username", [""])[0]
             password = data.get("password", [""])[0]
             cfg = server.current_app().dashboard
-            if secrets.compare_digest(username, cfg.username) and secrets.compare_digest(
+            if _creds_match(username, password, cfg):
-                password, cfg.password
+                server.clear_login_failures(client)
-            ):
+                token = server.new_session()
-                token = secrets.token_urlsafe(32)
-                csrf = secrets.token_urlsafe(32)
-                server._sessions[token] = (time.time() + _SESSION_MAX_AGE, csrf)
                 self.send_response(HTTPStatus.SEE_OTHER)
                 self.send_header("Location", "/")
                 self.send_header(
@@ -2904,6 +3058,7 @@ class _Handler(BaseHTTPRequestHandler):
                 self.send_header("Content-Length", "0")
                 self.end_headers()
             else:
+                server.note_login_failure(client)
                 self._send_bytes(
                     HTTPStatus.UNAUTHORIZED, "text/html; charset=utf-8", _render_login_page(error=True)
                 )
@@ -2912,9 +3067,9 @@ class _Handler(BaseHTTPRequestHandler):
         if not self._check_auth():
             return
 
-        length = int(self.headers.get("Content-Length", 0))
+        form = self._read_form()
-        raw_body = self.rfile.read(length) if length > 0 else b""
+        if form is None:
-        form = parse_qs(raw_body.decode("utf-8", errors="replace"))
+            return
 
         # Only cookie-authenticated requests need a CSRF token. Basic Auth
         # clients prove identity on every request so they're not subject to

src/inspector/formatting.py

@@ -1,14 +1,49 @@
 from __future__ import annotations
 
-from datetime import datetime, timezone
+import logging
-from zoneinfo import ZoneInfo
+import os
+from datetime import datetime, timezone, tzinfo
+from zoneinfo import ZoneInfo, ZoneInfoNotFoundError
 
 
-PACIFIC = ZoneInfo("America/Los_Angeles")
+log = logging.getLogger("inspector.formatting")
 
 
-def format_timestamp(value: datetime | str | None) -> str:
+def _resolve_local_tz(env: dict | None = None) -> tuple[tzinfo, str]:
-    """Render a timestamp in US Pacific time, e.g. '06-14 03:45 PM'.
+    """The zone every displayed time uses, plus its name.
+
+    Follows the same rules as the C library (which drives log timestamps and
+    the maintenance window), so all times Inspector shows agree:
+    TZ set to a zone name -> that zone; TZ unset -> the container's
+    /etc/localtime; anything else -> UTC.
+    """
+    env = os.environ if env is None else env
+    name = (env.get("TZ") or "").strip().lstrip(":")
+    if name:
+        try:
+            return ZoneInfo(name), name
+        except (ZoneInfoNotFoundError, ValueError):
+            log.warning(
+                "TZ=%r is not a known time zone name (e.g. Europe/Berlin); showing times in UTC",
+                name,
+            )
+            return timezone.utc, "UTC"
+    try:
+        with open("/etc/localtime", "rb") as fh:
+            zone = ZoneInfo.from_file(fh, key="localtime")
+        label = datetime.now(zone).tzname() or "localtime"
+        return zone, label
+    except (OSError, ValueError):
+        return timezone.utc, "UTC"
+
+
+# Resolved once at import; the container's TZ doesn't change while it runs.
+LOCAL_TZ, LOCAL_TZ_NAME = _resolve_local_tz()
+
+
+def format_timestamp(value: datetime | str | None, *, with_zone: bool = False) -> str:
+    """Render a timestamp in the configured local zone, e.g. '06-14 03:45 PM'
+    (with_zone adds the abbreviation: '06-14 03:45 PM CET').
 
     Accepts a datetime, an ISO 8601 string (as stored by EventStore /
     ContainerState), or None/"" (returns ""). Naive datetimes/strings are
@@ -24,4 +59,8 @@ def format_timestamp(value: datetime | str | None) -> str:
             return value
     if value.tzinfo is None:
         value = value.replace(tzinfo=timezone.utc)
-    return value.astimezone(PACIFIC).strftime("%m-%d %I:%M %p")
+    local = value.astimezone(LOCAL_TZ)
+    text = local.strftime("%m-%d %I:%M %p")
+    if with_zone:
+        text += f" {local.tzname()}"
+    return text

src/inspector/main.py

@@ -41,7 +41,7 @@ from .maintenance import MaintenanceTracker
 from .notification_mute import NotificationMuteTracker
 from .notifier import GotifyNotifier, MultiNotifier, NullNotifier, PushoverNotifier
 from .portainer_client import PortainerClient
-from .recovery import perform_recovery
+from .recovery import perform_recovery, run_post_redeploy_recheck
 from .uptime_kuma import HeartbeatSnapshot, UptimeKumaClient
 from .state import (
     ContainerState,
@@ -63,6 +63,19 @@ def _request_stop(signum, _frame):
     _stop = True
 
 
+def _is_normal(status: str | None, container_config: ContainerConfig) -> bool:
+    """True when `status` means the container is working.
+
+    HEALTHY always counts. NO HEALTH CHECK (running, but the image defines no
+    health check) counts too, unless the user made it a restart trigger.
+    Many images have no health check, and without this their error count and
+    restart episode would never reset.
+    """
+    if status == HEALTHY:
+        return True
+    return status == NO_HEALTH_CHECK and NO_HEALTH_CHECK not in container_config.restart_on
+
+
 def _apply_reachability_override(
     container_config: ContainerConfig,
     result: HealthResult,
@@ -140,6 +153,11 @@ def _check_one(
     if notification_mute.is_muted(name):
         notifier = NullNotifier()
 
+    if state.redeploy_recheck_at is not None and now >= state.redeploy_recheck_at:
+        run_post_redeploy_recheck(
+            container_config=container_config, state=state, notifier=notifier, now=now,
+        )
+
     if state.previous_status != state.current_status:
         log.info(
             "%-*s status: %s -> %s%s",
@@ -158,19 +176,25 @@ def _check_one(
             message=result.message,
         )
 
+    is_normal = _is_normal(state.current_status, container_config)
     if (
         state.previous_status is not None
-        and state.previous_status != HEALTHY
+        and not _is_normal(state.previous_status, container_config)
-        and state.current_status == HEALTHY
+        and is_normal
+        # HEALTHY here means "a recovery was already announced", for either status.
         and state.last_notification_state != HEALTHY
     ):
-        log.info("%-*s recovered: %s -> HEALTHY", width, name, state.previous_status)
+        log.info("%-*s recovered: %s -> %s", width, name, state.previous_status, state.current_status)
+        back_to = (
+            "**HEALTHY**" if state.current_status == HEALTHY
+            else "**running** (no health check)"
+        )
         notifier.notify(
             title=f"✅ Inspector: {name} recovered",
             message=(
-                f"**{name}** is back to **HEALTHY** (was *{state.previous_status}*).\n\n"
+                f"**{name}** is back to {back_to} (was *{state.previous_status}*).\n\n"
                 f"- Errors before recovery: **{state.error_count}**\n"
-                f"- Time: {format_timestamp(now)}"
+                f"- Time: {format_timestamp(now, with_zone=True)}"
             ),
             priority=3,
         )
@@ -178,7 +202,7 @@ def _check_one(
             container=name,
             event_type=EVENT_RECOVERY,
             old_status=state.previous_status,
-            new_status=HEALTHY,
+            new_status=state.current_status,
             error_count=state.error_count,
         )
         state.last_notification_state = HEALTHY
@@ -196,7 +220,7 @@ def _check_one(
                     f"**{name}** is missing from Docker.\n\n"
                     + (f"- Detail: {result.message}\n" if result.message else "")
                     + f"- Last known status: *{state.previous_status or 'unknown'}*\n"
-                    f"- Time: {format_timestamp(now)}"
+                    f"- Time: {format_timestamp(now, with_zone=True)}"
                 ),
                 priority=7,
             )
@@ -240,7 +264,7 @@ def _check_one(
                     + ".\n\n"
                     f"- Error count: **{state.error_count}/{container_config.max_error_count}**\n"
                     f"- Previous status: *{state.previous_status or 'unknown'}*\n"
-                    f"- Time: {format_timestamp(now)}"
+                    f"- Time: {format_timestamp(now, with_zone=True)}"
                 ),
                 priority=5,
             )
@@ -253,9 +277,9 @@ def _check_one(
                 message=result.message,
             )
             state.last_notification_state = result.status
-    elif result.status == HEALTHY:
+    elif is_normal:
         if state.error_count != 0:
-            log.info("%-*s healthy again; resetting error count", width, name)
+            log.info("%-*s back to normal; resetting error count", width, name)
         state.error_count = 0
         state.restarted_this_episode = False
 
@@ -276,7 +300,7 @@ def _check_one(
                         f"**{container_config.max_restarts_per_hour}** restart(s)/hour.\n\n"
                         f"- Current status: **{result.status}**\n"
                         f"- Restarts paused until the hourly window clears\n"
-                        f"- Time: {format_timestamp(now)}"
+                        f"- Time: {format_timestamp(now, with_zone=True)}"
                     ),
                     priority=9,
                 )
@@ -293,8 +317,10 @@ def _check_one(
 
         if ok:
             dep = container_config.depends_on
-            if dep:
+            # Only wait on a dependency Inspector is watching. A disabled one has
-                dep_status = states[dep].current_status if dep in states else None
+            # no state, and waiting on it would block recovery forever.
+            if dep and dep in states:
+                dep_status = states[dep].current_status
                 if dep_status not in (HEALTHY, STARTING, NO_HEALTH_CHECK):
                     if container_config.vpn_routed:
                         log.info(
@@ -454,8 +480,10 @@ def run_loop(config_ref: ConfigRef) -> int:
         for gone in states.keys() - current_enabled.keys():
             states.pop(gone, None)
             log.info("Stopped watching container (removed or disabled): %s", gone)
+        if current_enabled != enabled_configs:
+            # Only re-order (and re-log ordering warnings) when the config changed.
+            check_order = _topological_order(current_enabled)
         enabled_configs = current_enabled
-        check_order = _topological_order(enabled_configs)
 
         # Integration clients hold their config; rebuild them when the
         # settings page changes Uptime Kuma / Portainer.

src/inspector/notifier.py

@@ -33,9 +33,10 @@ class GotifyNotifier:
             },
         }
         try:
+            # Header, not ?token=, so the token stays out of access logs.
             resp = requests.post(
                 url,
-                params={"token": self._config.token},
+                headers={"X-Gotify-Key": self._config.token},
                 json=payload,
                 timeout=self._timeout,
             )

src/inspector/recovery.py

@@ -1,7 +1,6 @@
 from __future__ import annotations
 
 import logging
-import time
 from datetime import datetime, timedelta
 
 from .config import AppConfig, ContainerConfig, PortainerConfig
@@ -175,7 +174,8 @@ def _perform_restart_then_redeploy(
       - the container is still failing on a later recovery cycle
         (`state.restarted_this_episode` is already set), meaning the restart didn't stick.
 
-    The episode flag resets when the container is next seen HEALTHY (see main._check_one).
+    The episode flag resets when the container is next seen working: HEALTHY, or
+    NO HEALTH CHECK when that isn't a restart trigger (see main._is_normal).
     """
     name = container_config.name
 
@@ -228,7 +228,7 @@ def _perform_restart_then_redeploy(
             f"**{result.status}** check(s).\n\n"
             f"- If it doesn't recover, Inspector escalates to a Portainer stack redeploy\n"
             f"- Cooldown: **{container_config.cooldown_seconds}s** after restart\n"
-            f"- Time: {format_timestamp(now)}"
+            f"- Time: {format_timestamp(now, with_zone=True)}"
         ),
         priority=6,
     )
@@ -242,7 +242,7 @@ def _perform_restart_then_redeploy(
         state.restart_limit_notified = False
         log.info(
             "%-*s restart succeeded; cooldown until %s (will redeploy if still failing)",
-            width, name, state.cooldown_until.isoformat(),
+            width, name, format_timestamp(state.cooldown_until, with_zone=True),
         )
         eventstore.record(
             container=name,
@@ -250,15 +250,15 @@ def _perform_restart_then_redeploy(
             old_status=state.previous_status,
             new_status=result.status,
             error_count=state.error_count,
-            message=f"restart succeeded; cooldown until {state.cooldown_until.isoformat()}",
+            message=f"restart succeeded; cooldown until {format_timestamp(state.cooldown_until, with_zone=True)}",
         )
         notifier.notify(
             title=f"✅ Inspector: {name} restart completed",
             message=(
                 f"**{name}** was successfully restarted by Docker.\n\n"
                 f"- Previous status: *{result.status}*\n"
-                f"- Cooldown until: {state.cooldown_until.isoformat()}\n"
+                f"- Cooldown until: {format_timestamp(state.cooldown_until, with_zone=True)}\n"
-                f"- Time: {format_timestamp(now)}"
+                f"- Time: {format_timestamp(now, with_zone=True)}"
             ),
             priority=3,
         )
@@ -321,7 +321,7 @@ def _perform_docker_action(
             f"{verb.capitalize()}ing **{name}** after **{state.error_count}** consecutive "
             f"**{result.status}** check(s).\n\n"
             f"- Cooldown: **{container_config.cooldown_seconds}s** after {verb}\n"
-            f"- Time: {format_timestamp(now)}"
+            f"- Time: {format_timestamp(now, with_zone=True)}"
         ),
         priority=6,
     )
@@ -335,22 +335,22 @@ def _perform_docker_action(
         state.record_restart(now, container_config.cooldown_seconds)
         state.last_notification_state = "RESTARTED"
         state.restart_limit_notified = False
-        log.info("%-*s %s succeeded; cooldown until %s", width, name, verb, state.cooldown_until.isoformat())
+        log.info("%-*s %s succeeded; cooldown until %s", width, name, verb, format_timestamp(state.cooldown_until, with_zone=True))
         eventstore.record(
             container=name,
             event_type=EVENT_RESTART,
             old_status=state.previous_status,
             new_status=result.status,
             error_count=state.error_count,
-            message=f"{verb} succeeded; cooldown until {state.cooldown_until.isoformat()}",
+            message=f"{verb} succeeded; cooldown until {format_timestamp(state.cooldown_until, with_zone=True)}",
         )
         notifier.notify(
             title=f"✅ Inspector: {name} {verb} completed",
             message=(
                 f"**{name}** was successfully {verb}ed by Docker.\n\n"
                 f"- Previous status: *{result.status}*\n"
-                f"- Cooldown until: {state.cooldown_until.isoformat()}\n"
+                f"- Cooldown until: {format_timestamp(state.cooldown_until, with_zone=True)}\n"
-                f"- Time: {format_timestamp(now)}"
+                f"- Time: {format_timestamp(now, with_zone=True)}"
             ),
             priority=3,
         )
@@ -362,7 +362,7 @@ def _perform_docker_action(
                 f"{verb.capitalize()} of **{name}** failed.\n\n"
                 f"- Status: **{result.status}**\n"
                 f"- Error count: **{state.error_count}**\n"
-                f"- Time: {format_timestamp(now)}\n\n"
+                f"- Time: {format_timestamp(now, with_zone=True)}\n\n"
                 f"```\n{err}\n```"
             ),
             priority=9,
@@ -469,7 +469,7 @@ def _perform_portainer_redeploy(
             f"Redeploying Portainer stack **{stack_name}** (environment **{environment}**) "
             f"to recover **{name}**.\n\n"
             f"- Status: **{result.status}**\n"
-            f"- Time: {format_timestamp(now)}"
+            f"- Time: {format_timestamp(now, with_zone=True)}"
         ),
         priority=6,
     )
@@ -483,7 +483,7 @@ def _perform_portainer_redeploy(
             message=(
                 f"Portainer redeploy of **{stack_name}** (environment **{environment}**) failed.\n\n"
                 f"- Triggered by: **{name}** ({result.status})\n"
-                f"- Time: {format_timestamp(now)}\n\n"
+                f"- Time: {format_timestamp(now, with_zone=True)}\n\n"
                 f"```\n{redeploy_result.message}\n```"
             ),
             priority=9,
@@ -516,29 +516,51 @@ def _perform_portainer_redeploy(
             f"successfully redeployed to recover **{name}**.\n\n"
             f"- Triggered by: *{result.status}*\n"
             f"- Post-redeploy wait: {wait_seconds}s\n"
-            f"- Time: {format_timestamp(now)}"
+            f"- Time: {format_timestamp(now, with_zone=True)}"
         ),
         priority=4,
     )
 
-    log.info("waiting %d seconds after stack redeploy", wait_seconds)
+    # Don't block the loop while the stack settles: keep this container in
-    time.sleep(wait_seconds)
+    # cooldown for the wait plus its normal cooldown, and do the one-time HTTP
-
+    # re-check on its first regular check after the wait (main._check_one).
+    log.info(
+        "%-*s letting stack %s settle for %ds; other containers keep being checked",
+        width, name, key, wait_seconds,
+    )
+    state.record_restart(now, wait_seconds + container_config.cooldown_seconds)
     if container_config.http_check.enabled:
+        state.redeploy_recheck_at = now + timedelta(seconds=wait_seconds)
+
+
+def run_post_redeploy_recheck(
+    *,
+    container_config: ContainerConfig,
+    state: ContainerState,
+    notifier: GotifyNotifier,
+    now: datetime,
+) -> None:
+    """One HTTP re-check after a stack redeploy has had time to settle.
+
+    Called by main._check_one once `state.redeploy_recheck_at` has passed;
+    alerts if the app still doesn't answer.
+    """
+    state.redeploy_recheck_at = None
+    name = container_config.name
+    if not container_config.http_check.enabled:
+        return
     recheck = check_http(container_config.http_check)
     if recheck.ok:
         log.info("recheck succeeded for %s", name)
-        else:
+        return
     log.warning("recheck failed for %s: %s", name, recheck.message)
     notifier.notify(
         title=f"⚠️ Inspector: {name} recheck failed after redeploy",
         message=(
-                    f"Portainer stack **{stack_name}** was redeployed, but the HTTP recheck "
+            f"Portainer stack **{container_config.portainer_stack_name}** was redeployed, but the HTTP recheck "
             f"for **{name}** still reports a failure.\n\n"
             f"- Recheck result: *{recheck.message}*\n"
-                    f"- Time: {format_timestamp(now)}"
+            f"- Time: {format_timestamp(now, with_zone=True)}"
         ),
         priority=6,
     )
-
-    state.record_restart(now, container_config.cooldown_seconds)

src/inspector/state.py

@@ -29,6 +29,8 @@ class ContainerState:
     restart_limit_notified: bool = False
     restarted_this_episode: bool = False
     last_check_at: datetime | None = None
+    # After a stack redeploy: when to do the one-time HTTP re-check.
+    redeploy_recheck_at: datetime | None = None
 
     def in_cooldown(self, now: datetime) -> bool:
         return self.cooldown_until is not None and now < self.cooldown_until